The EX2.5MkII is a double 15″ subwoofer and the ‘active’ brother of the ES2.6 passive bass module. It provides real depth and power where high bass output is required. The product uses the same low frequency amplifier found inside the EPAK2500/2500R and features in-built stereo crossovers, high pass outputs, and full overdrive protection. It also features a new speaker level output on an AP4 connector to drive one additional passive ES2.6 subwoofer from its own internal amplifier. (Not to be used with a passive ES2.5)
Features
- Professional, Baltic birch construction with wear resistant polymer coating
- 137dB sustained output 140dB peak (when used with an ES2.6)
- 1600W high efficiency, current enhancing, switching low frequency amplifier
- Speaker level AP4 output to drive one additional passive ES2.6 subwoofer
- Complete on board subwoofer management including equalization, crossover, filters, amplifier overdrive protection, output level and phase controls
- Excellent reproduction of sub bass frequencies with high transient content at high output levels
- Stereo or Mono inputs with through signal outputs and 125Hz High Pass outputs
- Two 15″ high output, low frequency drivers with 4″ (100 mm) inside/outside, epoxy baked, high temperature, voice coil assembly and ferrite magnetic structures
- Four propietry side handles for simplified handling and carrying
- Heavy duty front grille to work with the innovative new EX2.5 magnetic cart
- Acetyl copolymer high impact, low friction feet are located on two sides allowing vertical or horizontal set up and easy cabinet movement Feet lock in to the new ES subwoofers
- Six internal corner braces with twelve M10 suspension points M20 top hat for pole mounting applications
- LED indicators for signal present, limiter, thermal condition and power ON status
Specifications
System Acoustic Performance
| Max SPL Long-term | 131dB |
| Max SPL Peak | 134dB |
| -3dB Response | 38Hz to 125Hz |
| -10dB Response | 34Hz to 125Hz |
| Impedance | 8Ω |
| Crossover Point | 125Hz |
Output Channels
| Number of Channels | 1 |
| Minimum load impedance per channel | 4Ω |
Low Frequency Section
| Acoustic Design | Twin Asymmetrical loading |
| Woofer Size / Voice Coil Diameter / Design | 2x 15″ / 4″ / Inside Outside |
| Diaphragm Material | Epoxy Reinforced Cellulose |
| Magnet Type | Ferrite |
Low Frequency Amplifier Specification
| Type | High efficiency, Low frequency, Current-enhancing switch mode |
| Rated Continuous Power | 1600W |
| Distortion | <0.05% |
| Operating Bandwidth | 34Hz to 125Hz |
Signal Input
| Input Channels | 2 |
| Input Sensitivity | 1.0V RMS |
| Input Impedance | 20kΩ (balanced) |
Signal Output
| Signal Output Channels | Mid/High, Through |
| Slave Speaker Output | AP4 |
Features
| Level Control | -6 to +6dB |
| Phase | 0° / 180° |
| RMS Limiter | YES |
| Indicators | Power ON/Thermal, Limiter |
Power Requirements
| Power Connector | Neutrik PowerCon® |
| Output Power Connector | Neutrik PowerCon® |
| Operating Voltage | 115V / 230V / 250V |
| Operating Voltage Range | 100 to 120V@60Hz | 205 to 240V@50Hz | 225 to 260V@50Hz |
| Recommended Amperage | 16A 115V | 8A 230V | 8A 250V |
Cabinet
| Cabinet Material | Baltic birch |
| Handles | 4 |
| Pole Mount | M20 |
| Color | “Orange peeled” Matt Black or any RAL |
Physical Dimensions
| Height | 711.5 mm (28.0″) |
| Width | 602.6 mm (23.72″) |
| Depth | 750 mm (29.52″) |
| Weight | 97 kg (214lbs) |
Reviews
There are no reviews yet.